Replacing A Rear Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha Majesty YP400Z Owner's Manual

Replacing a rear turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove cowling C for replacing
the left turn signal light bulb or
cowling D for replacing the right
turn signal light
page 7-8.)
3. Remove the socket (together with
the turn signal light bulb) by turning
it counterclockwise.
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
5. Insert a new bulb into the socket,
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU34263 push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the cowling removed.
bulb. (See
1
Replacing the license plate
light bulb
1. License plate light lens
2. License plate light cover
3. Screw
7-36
1. Place the scooter on the center-
stand.
2. Remove cowling
page 7-8.)
3. Remove the license plate light cov-
er and license plate light lens by
removing the screws.
4. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU34273
B. (See
2
3
4
1
5
2
6
3
7
8
9