Gemini PS-828EFX Operation Manual page 4

12.5” 4 channel mixer with effects
Table of Contents

Advertisement

Available languages

Available languages

INTRODUCTION:
Congratulations on your purchase of
stereo mixer With effects. This-state-of-the-art mixer features the latest
technological advances and is backed by a 1 year warranty, excluding the
cross fader. The cross fader is backed by a separate 90 day warranty.
Prior to use we suggest that you carefully read all the instructions.
FEATURES:
- 12.5" 4 Stereo channel mixer
- 5 line, 2 Phono inputs 2 microphone jacks 1/4" (6.35mm)
- 3 band rotary line EQ with cut feature & rotary gain channel control
- Separate Cue Switch for each channel
- Rotary cue volume, CUE/PGM rotary knob
- VU meter on each channel
- Talkover switch
- Removable face plate for user replaceable Rail Glide cross fader
- 3 effects with parameter control
PRECAUTIONS:
1. All instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit.
Please refer all servicing needs to a
technician.
3. Do not expose this unit to direct sunlight or a heat source such
as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid sol-
vents or other cleaning detergents.
5. When moving this equipment it should be placed in its original
carton and packaging. This will reduce the risk of damage during
transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON
CONTROLS, SURFACES OR SWITCHES.
IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:
1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.
CONNECTIONS:
Ensure that the
1
is in the
position prior to making any connections.
2
This unit comes with a
socket before plugging it in to a proper power
source.
3
The
connects the mixer to your main amplifier using standard audio
cables with
-type connectors.
4
The
The
output jacks can be used to connect the mixer to the
record input of your recording unit, thus enabling you to record your
mix with
cables.
5
The
has balanced
output rotary.
12.5" 4 channel
-qualified service
Plug in to the rear panel
outputs controlled by the master
6
The
has
each channel has two corresponding lines and can be chosen via the
channel line switches (see 12)
When switched to the PH position you may use any Turntable with a
magnetic cartridge, remember to connect your ground wire (see
) or there may be a system hum.
And when the switch is in the
level device as described before (Mp3, CD, Tape etc).
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH INPUT MAY CAUSE
THAT MIXER CHANNEL TO OVERLOAD AND OR DISTORT
Now you may plug the
input to be connected to their respective
7
When using (a) turntable(s), you will need to ground the
cable(s) by screwing in the grounding fork(s) to the
SCREW located on the rear panel of the
Attach a
(Turntable) ground line to the silver
that is situated at the bottom middle of the rear
panel.
8
The main
or Microphone input is located in middle of the back
panel of the
There is also an AUX MIC input located at the top left hand corner of
the front panel. You can control the gain of both together and even
set the low's and the high's for the
9
The
corner of the
1/4" connector and or adapter and will allow you to
program before you play it, you can adjust the volume and
of the
(see
Then when all of your connections have been made turn on the
mixer by pressing the
CONTROLS:
10
Allows you to adjust the volume of the microphone signal.
11
and
The
the high frequency of the microphone signal. The
allows you to quickly attenuate the main output so the microphone
can be heard over the main music program.
12
The
which input will be controlled by that channels corresponding
volume
.
For example on
choose between
and
and on
and the
input, and on
between
and
PS-828EFX
position you may connect any line
from your playable medium into each
(CH).
mixer.
and will accept a standard 1/4" connector.
(See
located at the front bottom left hand
will accept any headphone with a standard
).
.
Let's you to control the low frequency and
switches allow you to choose
(1) the
and
, on
will let you choose between
(3) you can choose between
(4) you can choose
.
).
your music
mix
switch
allows you to
(2) the
4

Advertisement

Table of Contents
loading

Table of Contents