Start The Washer - Kenmore 417.4110 Series Use & Care Manual

Operating Your Washer, continued
6 Select the appropriate cycle and settings for
the load.
• Press the POWER button to turn the unit on.
• Turn the cycle selector knob in either direction to se-
lect the cycle desired. The indicator for that cycle will
be illuminated.
• The estimated cycle time, suitable wash and rinse
water temperatures, fi nal spin speed, soil level, and
options for each cycle will be indicated for the cycle
selected. See the "Washer Settings Chart" for more
details.
• To change the settings, press the
Speed and Soil Level buttons to scroll to the desired
settings.
• To select or delete an option, press the button for that
option. The indicator will be illuminated when the op-
tion has been selected. The indicator will no longer be
lighted when the option has been deleted.
NOTE
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a setting
or option is not available for the cycle selected, the
indicator will not light.

7 Start the washer.

• Close the door and press
operate with the door open.
as a reminder to close the door.
• Select Delay Start to delay the beginning of the cycle,
if desired.
• As a safety measure, the door will automatically lock
during the entire wash cycle.
• To add a forgotten item to the washer any time during
the wash portion of the cycle, press PAUSE. When the
door unlocks, open the door, add the item, close the
door and press START to resume the cycle.
• If changes to the settings or options are attempted
after the cycle starts, you will hear several beeps
Wash/Rinse, Spin
START. The washer will not
will be displayed
Operating Instructions
when the buttons are pressed. To change the settings
or options, press PAUSE, make the new selections and
press START again.
• To change the cycle once the cycle has begun, press
POWER to cancel the current cycle, press POWER
to turn on unit again, select a new cycle, and press
START again. Just turning the cycle selector knob will
not change the cycle.
• To stop the cycle, press
• A signal will sound at the end of the cycle if the
Chime option has been selected.
• Remove items from the washer when the cycle ends
and place in dryer, line dry or dry fl at as directed on
the fabric care label.
For best results
Follow the fabric care label instructions
on items to be washed.
• Excess wrinkling, color transfer or odors may develop
in items left in the washer after the cycle has ended, if
not removed promptly.
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
Do not leave the door open if there are small children or
pets present. An open door could entice children to hang
on the door or crawl inside the washer. If there are no
small children present, you may leave the door ajar to
prevent odor build up.
15
POWER.