Table of Contents
Advertisement
The temperature measurement sample window is also expanded to
suit.
Note: x4 zoom is only provided on 320 camera types.
3.8.5 Time and Date
On start-up, the time and date are displayed at the top of the screen for
5 seconds. The date format and time can be adjusted using the
software configuration tool (see section 4).
3.9 Display Warning Graphics
The Argus
control and user warning system. In addition to controlling the automatic
operation of the camera to ensure the best possible picture at all times, the
control system provides graphics on the display to alert the user to certain
conditions as follows:
3.9.1 Over-temperature Warning
If the user ignores this warning and continues to operate the camera in
very high temperatures, the warning symbol will flash.
When the flashing temperature warning is present, the camera is
very close to its absolute operating limit and the image will start
to degrade considerably. The user must remove the unit from the
high ambient temperature at this time; failure to comply may
result in permanent damage to the unit. Failure to act upon this
level of warning may result in serious damage to the system and
may invalidate the warranty.
3.9.2 General System Failure Warning
contact your e2v representative.
Failure to act upon this level of warning may result in serious
damage to the system and may invalidate the warranty.
e2v technologies (uk) limited 2013
®
Mi-TIC is equipped with an advanced microprocessor based
The internal temperature of the camera is above the correct
operating range. The camera must be turned off to cool down
and prevent permanent damage.
The control system has detected an internal camera fault.
Turn the camera off for five minutes and turn back on again. If
the warning symbol is still present, or the symptoms return,
CR 114528
05 Apr 2013
DAS775571AA Version 1, page 12
Hide quick links:
Advertisement
Table of Contents
