Setting The Date / Time - Argus DC3650 User Manual

SETTING THE DATE / TIME

When taking a picture, the date and time are recorded as the part of the image information. If the
built-in clock of this camera is not set correctly, the wrong date and time ate recorded. Set the date
and time correctly by performing the procedure below.
1 1 Rotate the function dial to
to turn on the camera.
• The power switch returns to the initial position.
2 2 Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the LCD monitor as shown in the
figure.
and slide the power switch
Continued on Next page 117