Introduction; Foreword; Contact Info; Functional Overview - Grizzly G9249 Owner's Manual

foreword

We are proud to offer the Model g9249 12" x 37"
Belt drive gap Bed lathe. this machine is part
of a growing grizzly family of fine metal-working
machinery. When used according to the guidelines
set forth in this manual, you can expect years of
trouble-free, enjoyable operation and proof of
grizzly's commitment to customer satisfaction.
the specifications, drawings, and photographs
illustrated in this manual represent the Model
g9249 when the manual was prepared. however,
owing to grizzly's policy of continuous improve-
ment, changes may be made at any time with no
obligation on the part of grizzly. For your conve-
nience, we always keep current grizzly manuals
available on our website at www.grizzly.com.
Any updates to your machine will be reflected
in these manuals as soon as they are complete.
Visit our site often to check for the latest updates
to this manual!

contact Info

We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
/ technical documentation Manager
C
o
p.o. Box 2069
Bellingham, WA 98227-2069
email: manuals@grizzly.com
-2-

INTRODucTION

functional Overview

the metal lathe is used to remove material from
a workpiece mounted on the rotating spindle. the
spindle receives power from the electric motor
through the gears and belts in the headstock.
tools used for turning or threading the workpiece
are mounted on the carriage or tailstock. the
tooling is moved parallel or across the workpiece
by moving the carriage or cross slide. the move-
ment of these mechanisms is controlled manually
by handwheels or automatically with the power
feed.
spindle speeds are selected by configuring the
gears and belts in the headstock. power feed
rates of the carriage or cross slide are selected
by configuring the change gears and feed rate
selectors.
the usual cutting operations for this lathe include
facing, turning, parting, drilling, reaming, grooving,
knurling, and threading. there is a wide variety of
tools and workpiece holding devices for each of
these processes.
g9249 12" x 37" Belt drive gap Bed lathe