Mounting - Symmetricom ND-CLK User Manual

Mounting

The ND-CLK is designed for surface mounting on a wall. Power and/or low voltage
signal wiring should be provided and installed according to local electrical codes to
access the clock from the rear.
A mounting bracket is supplied which has been designed to fit on either a standard 2"x 4"
or 4" x 4" conduit box. Mount the bracket on the wall/conduit box and attach the power
& signal cables, secure the clock to the bracket using the retaining screw.
Caution : Do not route power or signal cables between the case and the wall (along
the exterior of the wall), which may pinch the power or signal cable and create a
hazardous condition.
See Appendix C for additional information regarding mounting the ND-CLK.
6
®
ND-CLK User Manual- Rev 1.0.1 - Sep-08 Symmetricom , Inc