Heatilator I80 Owner's Manual Installation And Operation page 17

Note:
To ensure proper installation, gas knockouts in the side
refractory should be positioned towards back of fi replace. See
Figure 4.15.
GAS
KNOCKOUT
Figure 4.15 Gas Knockout
• Tilt top of side refractory towards center of fi rebox when
placing it into fi replace. Push side refractory towards
back corner of fi replace until it fi ts tightly against back
refractory.
• Secure side refractory in place with a screw and bracket
provided in the hardware package.
• Repeat these two steps for installation of the other side
refractory.
• When placing hearth stone into fi replace, slide it back
until it fi ts tightly against back refractory (underneath grate
brackets). See Figure 4.16.
GRATE
BRACKET
Figure 4.16 Sliding Bottom Refractory Towards
Back of Fireplace
•
•
•
Heatilator • I80 • 4013-023 Rev R • 10/06
Place grate into grate brackets. See Figure 4.17.
Replace smoke shield.
GRATE
BRACKET
Figure 4.17 Grate Secured in Grate Bracket
Replace left and right screens.
17