KVH Industries M5 User Manual page 27

Manual Satellite Switching
If the TracVision system includes a multiswitch, you can use the
receivers' remote controls to change channels on the currently selected
satellite. If you need to switch satellites, simply use the buttons on the
front of the MCP (see Figure 2-17 and Figure 2-18).
Figure 2-17 Manual Satellite Switching - Receiver/MCP Controls (Quad-output version
shown)
Figure 2-18 Manually Switching Between Satellites - MCP Displays
Three Satellites Installed
<Sat B> Menu <Sat C>
Press
for Sat B
Switchplate
Antenna
Tracking <Sat A>
Press
for Sat C
Satellite Being
Tracked
TracVision M5/M7 User's Guide
Chapter 2 - Operation
MCP
Buttons used
to switch satellites
All Receivers
Changes
channels on
current satellite
Two Satellites Installed
Tracking <Sat A>
OR
<Sat B> Menu
Press
for Sat B
Satellite Being
Tracked
23