KVH Industries M5 User Manual page 20

TracVision M5/M7 User's Guide
Chapter 2 - Operation
16
DISH 1000 Automatic Mode - Preferred for One or Two Receivers
The antenna switches between satellites automatically as you change
channels using the primary receiver's remote control. The primary
receiver is the receiver connected to RF1 (see Figure 2-6 and
Figure 2-7). If an optional secondary receiver is connected, you can use
its remote control to switch between the channels on the currently
selected satellite.
Figure 2-6 DISH 1000 Automatic Mode - Receiver Controls
Antenna
RF2 RF1
RF2
Changes
channels on
current satellite
Figure 2-7 DISH 1000 Automatic Mode - MCP Displays
DISH 1000/61
Tracking DISH 119
110 Menu 61
Available Satellites
(Buttons Not Used)
Satellite Being
Switchplate
Grounding
Primary Receiver
Block
RF1
Secondary
Receiver
(optional)
DISH 1000/129
Tracking DISH 119
OR
110
Available Satellites
(Buttons Not Used)
Tracked
MCP
Automatically
switches
satellites/channels
Menu 129
Satellite Being
Tracked