Advertisement
Questions?
FILTER TANK LEAKS WATER
Split in tank due to freeze or other damage,
replace.
Lid o-ring damaged, twisted, or not lubricated
Inspect.
Lock ring to lid not tight. Inspect and tighten
down o engage lock tabs.
Air bleed valve loose or O-ring missing. Inspect.
Inlet/outlet fittings loose or not sealed. Inspect.
DEBRIS BACK TO POOL
Dirty filter. Clean element in filter cleaner or
replace.
Cracked dirt catcher. Inspect and replace if
necessary.
O-ring on bottom of dirt catcher damaged.
Install, replace with #47-0258-53R.
Filter collapsing. By-pass through top of dirt
catcher. Inspect or replace.
Filter isn't sealed in dirt catcher. Inspect.
Filter isn't sealed in dirt catcher. Inspect.
Filter is installed upside down. Install top-side.
Inspect.
FILTER DOESN'T DEEP WATER CLEAN.
Filter collapsing. Bypass through top of dirt
catcher. Inspect or replace.
Holes in filter. Inspect or replace.
Filter installed upside down. Inspect or install top
side up.
Filter isn't seated in dirt catcher. Inspect or install
top side up.
Fitler isn't seated in dirt catcher. Inspect.
Water started out dirty. Continue to filter and
clean as necessary.
Heavy swimmer load. Clean filter as necessary.
10 PSI rule.
Flow rate too low. Increase flow to turn water
more often.
PRESSURE DOESN'T DROP IN FILTER AFTER
CLEANING
Dirty filter. Clean element in filter cleaner or
replace.
Gate valve closed in return line. Inspect.
Return line partially clogged. Inspect.
Return fitting clogged. Inspect.
TANK WILL NOT ALIGN WITH BASE MOUNTING
HOSES
Check position of tank. Rotate.
Loosen pump from base to allow filter to move
and align.
FILTER LID LEAKING
Inspect O-ring, cracks, twisted. Replace.
Lid cracked. Replace.
Tank cracked. Replace.
4
Trouble
Shooting
Advertisement
