Alfa Romeo 166 Booklet page 43

Operations which lead to
knocks, vibrations or lo-
calised heating (over
100°C for a maximum of 6 hours)
in the area around the pretension-
ers may cause damage or trigger
them. These devices are not af-
fected by vibrations caused by ir-
regularities of the road surface or
low obstacles such as kerbs, etc.
Contact a Alfa Romeo Authorized
Services for any assistance.
GENERAL INSTRUCTIONS FOR
USING THE SEAT BELTS
The driver must comply with (and have
the vehicle occupants follow) all the local
legal regulations concerning the use of
seat belts.
Always fasten the seat belts before s-
tarting.
WARNING
For maximum safety,
keep the back of your
seat upright, lean back into it and
make sure the seat belt fits closely
across your chest and hips.
Make sure that the seat belts of
the front and rear passengers are
fastened at all times! You increase
the risk of serious injury or death
in a collision if you travel with the
belts unfastened.
WARNING
The belt should not be
twisted, make sure that it
is taut and adheres to the passen-
ger's body. The upper part should
pass over the shoulder and cross
the chest diagonally. The lower part
should adhere to the pelvis and to
the abdomen of the passenger, (fig.
53). Do not use any objects (pegs,
stoppers, etc.) to keep the belts
away from the body.
WARNING
Under no circumstances
should the components of
the seat belts and pretensioner be
tampered with or removed. Any
operation should be carried out by
qualified and authorised personnel.
Always contact Alfa Romeo Au-
thorized Services. If the belt has
been subjected to heavy stress, for
example after an accident, it
should be changed completely to-
gether with the anchors, anchor
fastening screws and the preten-
sioners. In fact, even if the belt has
no visible defects, it could have
lost its resilience.
fig. 53
43