Alfa Romeo 166 Booklet page 32

Controls for seats with electric
adjstment (on request for versions/
markets where applicable)
The position of the seats is adjusted
electrically with the controls (A-fig. 25-
26) and (B-fig. 25-27):
A - Multifunction control:
1 - raising the front of the seat
2 - raising the rear of the seat
3 - vertical movement of the seat
4 - longitudinal movement of the seat.
B - Multifunction control:
5 - seat back rake adjustment
6 - lumbar adjustment of the seat.
C - Seat heating.
fig. 25
32
Lumbar adjustment of the seat is carried
out raising or lowering the control (B-
fig. 25-27), until finding the most
comfortable position.
Seat heating (fig. 28)
Seat heating is turned on and off using
the switch (C) on the outer side of the
seat.
When seat warming is on the led on the
switch lights up.
fig. 26
Memorising the driver's seat
positions (fig. 29)
The system makes it possible to memo-
rise and call up three different positions
of the driver's seat.
To memorise a seat position, proceed as
follows:
1) Adjust the position of the driver's
seat with the controls described in the
previous paragraph.
2) Simultaneously press (for about 1
second) the button (MEM-fig. 29)
and one of the buttons (1), (2), or (3),
each corresponding to a position that can
be memorised.
3) Proceed in the same way to memo-
rise the other two positions of the seat.
fig. 27