Alfa Romeo 166 Booklet page 161

– Tighten the five fastening bolts (A-
fig. 12).
fig. 6
fig. 7
– Lower the car and remove the jack
(fig. 13).
– Completely tighten the bolts in the se-
quence shown (fig. 14).
– On cars having the same alloy rims
as the spare wheel ones, wheel cap can
be fitted following the instructions given
in the following paragraph.
IMPORTANT Never fit the wheel cap
to the spare wheel if the spare wheel is
different from the standard one.
After refitting a wheel:
– Stow the spare wheel in the space
provided in the luggage compartment and
fasten it with the ring nut (A-fig. 2).
– Put jack and tools back in the bag and
stow it in the boot.
fig. 8
161