Assembly Instructions - Stamina Gravity Inversion Table Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
STEP 1
BASE ASSEMBLY
Unfold the
FRAME(2).
Then push down on the middle of the two
locked down.
STEP 2
PROTECTIVE COVER(23)
Slide one
down until the bottom of the covers are slightly lower than the
PROTECTIVE COVERS(23)
bottom of the covers.
NOTE:
PROTECTIVE COVERS(23)
When the
should not be visible. Refer to the illustration.
parts@staminaproducts.com
to an upright position by moving the
onto each side of the
FOLDING LINKAGES(3)
to the
are assembled correctly, the
FRONT FRAME(1)
FOLDING LINKAGES(3)
BASE ASSEMBLY,
FOLDING LINKAGES(3).
with the
6
away from
until they are fully
and pull the covers
Secure the
SECURING STRAPS
FOLDING LINKAGES(3)
REAR
on the