Table of Contents
Advertisement
PJ lock
This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.
On1 . . . . . .requires to enter the PIN code every time turning on
the projector.
. . . .requires to enter the PIN code to operate the
On2
projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.
Off . . . . .the projector is unlocked with the PIN code. To
release PJ lock, select this setting.
Whenever to change the PIN code (the four-digit number), you
are required to enter the PIN code. "1234" is set as the initial
PIN code at the factory.
Enter a PJ PIN code
Select a number with using the Point buttons (e, d, 7, and 8)
or the Control pad and fix the number with the SELECT button.
The number changes to "✳." If you fixed a wrong number,
move the pointer to "C" once with the Point buttons (e, d, 7,
and 8) or the Control pad to clear the number. Enter the correct
number.
Repeat this step to complete entering a four-digit number.
When the four-digit number is fixed, move to "Ent." Press the
SELECT button so that you can change the following PIN code
lock settings.
If you entered a wrong PIN code, the number (✳✳✳✳) turns red
and disappear. Enter a PIN code all over again.
To Change the PJ PIN Code setting
Select Off, On1, or On2 with the Point buttons (e and d) or
the Control pad and then press the SELECT button.
To Change PJ PIN Code
The PIN code can be changed to your desired four-digit
number.
Select "PJ PIN code change" with the Point buttons (e and d)
or the Control pad, and press the SELECT button. The PIN code
input dialog box appears. Enter a current PIN code, and then a
new PIN code as follows:
Select a number with the Point buttons (e, d, 7, and 8) or the
Control pad and fix the number with the SELECT button.
Repeat it to complete entering a four-digit number. When the
four-digit number is fixed, move the pointer to "Ent." Then
press the SELECT button.
CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO.
MEMO ON PAGE 79, AND KEEP IT SECURELY. SHOULD
THE PIN CODE BE LOST OR FORGOTTEN, THE
PROJECTOR CAN NO LONGER BE OPERATED.
PJ lock
Enter a PIN code
Pointer
Change the PJ Lock setting
Change the PIN code
Select PJ PIN code change and
press the SELECT button. The PIN
code input dialog box appears.
The setting selected.
Pointer
Setting
When the projector is
locked with the PIN
code, the PJ lock mark
appears at top left of
the Main menu.
The input numbers
change to "✳" for
security.
Select a desired
setting with the
(e
Point buttons
and d)
or the
Control pad and
press the SELECT
button.
55
Advertisement
Table of Contents
