Panasonic PLC-XF60A Owner's Manual page 48

Screen Setting
D. Zoom
D. Zoom +
Press the SELECT button at the D. Zoom +. The message "D.
Zoom +" is displayed. Press the SELECT button to expand the
image size. And use the Point buttons (e, d, 7, and 8) or the
Control pad to pan the image. The Panning function can work
only when the image is larger than the screen size.
D. Zoom –
Press the SELECT button at the D. Zoom –. The message "D.
Zoom –" is displayed. Press the SELECT button to compress the
image size.
✔
Note:
To exit the D. Zoom +/– mode, try the followings:
• To return to the normal screen, change Input, or change the screen size.
• To exit the panning mode, press any button except the D. ZOOM button, the
SELECT button, and the CH and ID buttons.
Keystone
This function corrects distortion of a projected image. Press the
SELECT button at Keystone and the keystone dialog box appears.
Adjust keystone with the Point buttons (e, d, 7, and 8) or the
Control pad.
Press the Point 8 button or the Control pad at Keystone and
select either Store or Reset with the Point buttons (e and d) or
the Control pad, and then press the SELECT button to fix the
selection.
Store . . . .stores the keystone adjustment even if the AC
power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
Ceiling
When this function is "On," the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Rear
When this function is "On," the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
✔
Note:
• The True and D. Zoom +/– cannot be selected when projecting AV sources or
selecting 480i, 575i, 480p, or 575p in the System menu. (p.38~39)
• This projector cannot display any resolution higher than 1600 x 1200. If your
computer's screen resolution is higher than 1600 x 1200, reset the resolution to the
lower before connecting the source to the projector.
• The image data in other than XGA (1024 x 768 for PLC-XF60A) or SXGA (1400 x
1050 for PLC-EF60A) is modified to fit the screen size in initial mode.
• The panning function may not operate properly if the computer system prepared in
the PC Adjust Menu is used.
48
D. Zoom
Keystone
Ceiling
Rear