Manual Pc Adjust - Panasonic PLC-XF60A Owner's Manual

Manual PC Adjust

Some computers employ special signal formats which may not be
tuned by Multi-scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to
match those signal formats. The projector has 50 independent
memory areas to memorize those parameters adjusted manually.
It allows you to recall the setting for a specific computer easily.
1 Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (7 and 8) or the Control
pad and press the SELECT button when the PC ADJ. icon
comes right in front.
2
Move the yellow frame pointer with the Point buttons (e
and d) or the Control pad to an item which you want to
select.
3 Press the SELECT button to access an adjustment dialog
box. Adjust value with the Point buttons (e and d) or the
Control pad.
Fine sync
Eliminates flicker from the image displayed. Adjust value with the
Point buttons (e and d) or the Control pad.
(From 0 to 31)
Total dots
Adjusts the number of total dots in one horizontal period. Adjust
number to match your PC image with the Point buttons (e and
d) or the Control pad.
Current mode
Press the SELECT button to show H-Freq. and V-Freq. of the
connected computer.
Clamp
Adjusts clamp level (Phase and Width). When the image has dark
bars, try this adjustment.
Display area
Adjusts the resolution at the Display area dialog box.
Horizontal
Adjusts the horizontal area displayed by this projector.
Decrease or increase value with the Point buttons (e and d)
or the Control pad.
Vertical
Adjusts the vertical area displayed by this projector. Decrease
or increase value with the Point buttons (e and d) or the
Control pad.
Computer Adjustment
PC Adjust Menu
Adjust value with the
buttons (e and d) or
the
Current mode
Press the SELECT button at
the Current mode to show
the information of the
connected computer.
Move the yellow
frame pointer to an
item and press the
SELECT button.
Point
Control pad.
41