Husqvarna Rider ProFlex 18 Operator's Manual page 37

9. Unhook the height adjustment arm (E) by
raising the rear of the arm:
Release the pressure from the arm if necessary
by lifting or pushing down on the front of the
frame.
10. Pull the handle (D) and the unit simultaneously.
Release the handle when the unit has come out
a bit.
11. Pull out the unit so that it engages in the outer
hooks.
12. Lower the unit using the lever on the right-hand
side of the driver.
13. Pull the handle (D) so that the hook guard
locks. Check that the catch (A) is fully engaged.
14. Lift the unit off of the Rider.
36
– English
MAINTENANCE