Hangers; Hanger Supports - Grizzly G0671 Owner's Manual

8.
secure the hanger into the hanger sup-
port with one (Model g0673) or two (Model
g0671/g0672) ⁄ "-20 x
1
4
figure 18).
hanger
hanger support
figure 18. hanger attached to hanger support
(g061/g0672 shown).
9.
Mount the hanger assembly on the protruding
rod on the collector with one (Model g0671/
g0672) or two (Model g0673)
hex bolts, as shown in figure 19.
hex Bolt
⁄ "-20 x ⁄ "
1 1
4 2
figure 19. hanger assembly mounted onto
collector (g0671/g0672).
g0671/g0672/g0673 dust Collector
⁄ " hex bolts (see
1
2
hex Bolts
⁄ "-20 x ⁄ "
1 1
4 2
⁄ "-20 x ⁄ "
1 1
4 2
hanger
Assembly
10. Align the hanger assembly so that the hook is
directly over the center of the collector.
11. repeat Steps 8–10 for the remaining hanger
assemblies.
12. place the loop at the top of each upper col-
lection bag over each hook on the hanger
assemblies (see figure 20).
hook
Bag loop
figure 20. upper filter bag mounted on hanger
assembly.
13. thread the bag clamp into and around the
bottom seam of the upper collection bag (see
figure 21).
Bag Clamp
figure 21. upper filter bag secured to collector.
hanger
Assembly
-23-