Table of Contents
Advertisement
foreword
We are proud to offer the Model g0671/g0672/
g0673 dust Collector. this machine is part of
a growing grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of grizzly's commitment to customer satis-
faction.
the specifications, drawings, and photographs
illustrated in this manual represent the Model
g0671/g0672/g0673 when the manual was pre-
pared. however, owing to grizzly's policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of grizzly.
For your convenience, we always keep current
grizzly manuals available on our website at www.
grizzly.com. Any updates to your machine will be
reflected in these manuals as soon as they are
complete. Visit our site often to check for the lat-
est updates to this manual!
Contact info
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming Mall Circle
Muncy, pA 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
/
technical documentation Manager
C
o
p.o. Box 2069
Bellingham, WA 98227-2069
email: manuals@grizzly.com
-2-
iNTRODUCTiON
functional Overview
this machine is designed to capture dust and
wood chips from multiple woodworking machines
at the same time, such as table saws, jointers,
and planers.
the primary components of this dust collector are
the motor, impeller, and lower dust collection and
upper filtration bags.
this dust collector is designed to connect to a
duct system in which each woodworking machine
is connected to a single mainline via smaller
branch lines. Alternatively, each intake port on the
collector can be connected to an individual wood-
working machine with flexible hose or rigid duct.
When the dust collector is turned on, the impel-
ler rotates, pulling air in through the intake ports
and forcing it out through the collection and filtra-
tion bags. the vacuum created draws air, dust,
and chips produced from attached woodworking
machines through the duct system to the impel-
ler housing and into the collectors. here, heavier
particles fall into the collection bags while air and
the remaining fine particles are forced into the
filter bags. these bags capture most particles
while still allowing the air to escape. to capture
smaller particles, a fine filter can be purchased
separately.
the dust collector should not be located near
open flames, to reduce the risk of an explosion
as a result of dust being dispersed into the air.
the dust collection system must also be properly
grounded to safely discharge static electrical build-
up and prevent the risk of fire or explosions.
A wide variety of accessories for setting up a
stationary or mobile dust collection system are
available through grizzly.
g0671/g0672/g0673 dust Collector
Advertisement
Chapters
Table of Contents
