Optional Accessories; Specifications - Sharp XR-20X Specifications

XR-20X

Optional Accessories

Lamp USB Remote Receiver
AN-XR20LP
(For XR-20X/20S)
AN-XR10LP
(For XR-10X/10S)

Specifications

Model
Panels
Number of pixels
Resolution
RGB input signals
Video colour systems
Lens
Projection size
Projection distance
Luminance
Contrast ratio
Audio amplifiers
Speakers
Input terminals
Output terminals
Power source
Power consumption
Heat dissipation
Fan noise
Projection lamp
1
Lamp life*
Dimensions (W x H x D)
Weight
Design and specifications are current as of August 2005, but are subject to change without notice.
* DLP, DLP medallion and TrueVision are trademark of Texas Instruments Inc.
* All company and/or product names are trademarks and/or registered trademarks of their respective manufacturers.
Sharp makes no warranties or representations of any kind with respect to these products.
1
* The lamp life may vary depending on the usage condition.
SHARP CORPORATION
OSAKA, JAPAN
U R L h t t p : / / w w w . s h a r p - w o r l d . c o m /
XR-10X
Adaptor
AN-MR2 AN-A1RS
DIN-D-sub RS-232C
adaptor (15 cm)
X R-20X
786,432 dots (1,024 x 768)
600 TV lines (DTV 720P)
SXGA+/SXGA/Mac 21" (in intelligent compression),
XGA, SVGA, VGA, PC-98, VESA, Mac 19" /16" /13"
15-70 kHz (horizontal), 45-85 Hz (vertical), 12-108 MHz (pixel clock) (plug & play VESA: DDC 1/2B)
2,300 ANSI lumen (Standard Mode)
2,000 ANSI lumen (Low Power Mode)
Computer RGB/component x 2 (15-pin mini D-sub), video x 1 (RCA), S-video x 1, audio x 2 (3.5 mm mini jack x 1/ RCA L/R), RS-232C serial x 1 (9-pin mini DIN)
Computer RGB/component x 1 (15-pin mini D-sub), audio x 1 (3.5 mm stereo mini jack)
1,315 BTU/hour (Standard Mode)/ 1,145 BTU/hour (Low Power Mode) with AC 100V
1,240 BTU/hour (Standard Mode)/ 1,070 BTU/hour (Low Power Mode) with AC 240V
XR-20S
Cable
AN-C3CP2
3-RCA to 15-pin
D-sub cable (3 m)
X R-10X
0.55" DMD
NTSC 3.58/NTSC 4.43/PAL/PAL (60Hz)/PAL-M/PAL-N/SECAM
DTV (480I/480P/540P/576I/576P/720P/1035I/1080I-50Hz/60 Hz)
1:1.15 manual zoom and focus
40" (102 cm ) to 300" (762 cm) diagonal [Normal Mode (4:3)]
40" (102 cm): 1.4 – 1.6 m, 100" (254 cm): 3.5 – 4.0 m, 300" (762 cm): 10.4 – 12.1 m
2,000 ANSI lumen (Standard Mode)
1,750 ANSI lumen (Low Power Mode)
2000:1
2W (mono)
4 x 2.85 cm (oval) x 1
100-240V AC, 50/60 Hz (Multi-Voltage)
350W (Standard Mode), 305W (Low Power Mode), 4W (Standby) with AC 100V
330W (Standard Mode), 285W (Low Power Mode) , 5W (Standby) with AC 240V
33 dB (Standard Mode)/ 30 dB (Low Power Mode)
275W (DC) lamp
2,000 hours (Standard Mode)/ 3,000 hours (Low Power Mode)
315 x 109 x 280 mm (main body only),
315 x 120 x 294 mm (including adjuster legs and projecting parts)
3.9 kg
XR-10S
Ceiling Mounts
AN-TK201
For high ceiling
installation
Note: Some of the optional accessories may not be available depending on the region.
Please check with your nearest Sharp Authorized Projector Dealer or Service Center.
X R-20S
480,000 dots (800 x 600)
520 TV lines (DTV 720P input)
SXGA+/SXGA/XGA/Mac 21" /19" /16" (in intelligent compression),
SVGA, VGA, PC-98, VESA, Mac 13"
2,300 ANSI lumen (Standard Mode)
2,000 ANSI lumen (Low Power Mode)
© SHARP CORP. (AUG. 2005 PRINT) I 1 E Printed in Japan
AN-TK202
For standard ceiling
installation
AN-60TK
Installation adaptor
X R-10S
2,000 ANSI lumen (Standard Mode)
1,750 ANSI lumen (Low Power Mode)