Unpacking; Piece Inventory - Grizzly G7945 Instruction Manual

Unpacking

The Model G7945/46 is shipped from the manu-
facturer in a carefully packed carton. If you dis-
cover the machine is damaged after you've
signed for delivery, immediately call Customer
Service for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
smaller
sure
structures are capable of
supporting
bined
machine parts and the
people moving them.

Piece Inventory

After all the parts have been removed from the
carton, you should have:
• Headstock
• Base
• Column
• Table
• Column Lock
• Drill Chuck and Key
• Spindle Handles (3)
®
• Allen Wrenches (2)
• Handle
G7945/46 Radial Drill Press
pieces. Make
floor and stair
the com-
weight of
The G7945/7946 repre-
sents a heavy load at
100/150 pounds. Seek
assistance before begin-
ning assembly.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or, for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
the
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts,
please refer to the detailed illustrations at
the end of the manual.
• Pinion Gear
• Lock Handles (4, 5 for G7946)
• Rack
• Column Ring
• Hardware Bag
Figure 2. G7945 layout.
Figure 2A. G7946 layout.
NOTICE
-7-