3-Pin To 5-Pin Conversion Chart; Dmx Data Connection - Chauvet Legend 1200E Wash User Manual

Setup
3-Pin to 5-Pin
Conversion Chart
DMX Data
Connection
DMX Data
Connection
Diagram
CHAUVET Certified
DMX Data Cables
Legend™ 1200E Wash User Manual
It may be necessary to use a 3-pin to 5-pin adapter. Please see the chart below for
further explanation.
3-P
IN TO
Conductor
Ground/Shield
Data ( - ) signal
Data ( + ) signal
Not used
Not used
You may use the 3-pin input with the 5-pin output. You may also use 5-pin
input with the 3-pin output. However, you may
5-pin outputs simultaneously.
The fixture uses the DMX data connection for its DMX 16 & 21 Channel modes. See
the "Introduction" chapter for a description of the two DMX Channel modes and the
"Operation Instructions" chapter to learn how to configure the fixture appropriately
for this mode.
1. Connect the male connector of the first DMX cable to the DMX Output connector
(female) of the DMX controller.
2. Connect the, female connector of the first DMX cable coming from the controller
to the DMX Input connector (male) of the first fixture.
3. Connect the male connector of the second DMX cable to the DMX Output
connector (female) of the first fixture.
4. Connect the female connector of the second DMX cable coming from the first
fixture to the DMX Input connector of the second fixture.
5. Continue linking the other fixtures in the same way.
Universal
DMX
Controller
rd
3 DMX
nd
2 fixtures
Cable
DMX
Next fixture
Output
Order Code
DMX1.5
DMX4.5
DMX10
10
5-P C C
IN ONVERSION HART
3-Pin Female (Output)
Pin 1
Pin 2
Pin 3
use both the 3-pin and the
NOT
nd
2 DMX
Cable
DMX
DMX
Output
Input
Description
DMX Cable 1.5 m/4.9 ft
DMX Cable 4.5 m/14.8 ft
DMX Cable 10 m/32.8 ft
5-Pin Male (Input)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
st
1 DMX
Cable
st
1 fixture
DMX
Input
8/13/2009 10:55 AM