sub menu is preceded by a ">").
The settings are: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on the
type of device using the interrupt.
Please refer to section 3-9-1
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.
3-9-1
IRQ Resources
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
IRQ3
assigned to
IRQ4
assigned to
IRQ5
assigned to
IRQ7
assigned to
IRQ9
assigned to
IRQ10 assigned to
IRQ11 assigned to
IRQ12 assigned to
IRQ14 assigned to
IRQ15 assigned to
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Shutdown Temperature
Show PCHealth in POST
Current System Temperature
Current CPU Temperature
Magic Duct Temperature
Magic Duct Fan Speed
CPUFAN
SYSFAN
Vcore
AGP1.5
VDIMM
+12V
VCC (V)
VBAT(V)
5VSB(V)
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
IRQ Resources
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
F6:Optimized Defaults
PC Health Status
Disabled
Enabled
25 ° C
38 ° C
5000 rpm
5000 rpm
1.78V
12.22V
3.21V
5.02V
F6:Optimized Defaults
35
Item Help
Menu Level >>
F7:Standard Defaults
Item Help
Menu Level >
F7:Standard Defaults