Table of Contents
Advertisement
1-2 Specification
Spec
Design
Chipset
CPU Socket
Memory Socket
Expansion Slot &
Headers
Integrate IDE and
Serial ATA RAID
On board LAN
Audio
BIOS
Magic Duct
Multi I/O
∗ ATX form factor 4 layers PCB size: 30.5x24.5cm
∗ VIA PT880 North Bridge Chipset
∗ VIA VT8237 South Bridge
∗ Support Intel Pentium 4 478-Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗ Support Northwood/Hyper-Threading / Prescott CPU
∗ Support 1.5G∼3.4G 478 Pin Pentium 4 processor
∗ Reserves support for future Intel Pentium 4 processors
∗ 184-pin DDR module socket x4
∗ Support 4 pcs DDR266/DDR333/DDR400 DDR Modules
Expandable to 4.0GB
∗ Dual channel support
∗ AGP slot x1 support AGP 2.0 & 3.0 for 4X/8X mode
∗ 32-bit PCI slot x5
∗ Two PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100/133 functions that
deliver the data transfer rate up to 133 MB/s; Two Serial ATA
ports provide 150 MB/sec data transfer rate for two Serial ATA
Devices and offer RAID 0, 1 functions
∗ VIA VT6103 LAN PHY support 10/100Mbps full duplex, half
duplex operation
∗ Support Boot On LAN function
∗ AC'97 Digital Audio controller integrated
∗ AC'97 Audio CODEC on board
∗ Audio driver and utility included
∗ Support 6 channel Speaker for 3D surround effect
∗ Award 2MBit Flash ROM
∗ Enhanced thermal solution to protect MOSFET from burnt out
∗ PS/2 keyboard and PS/2 mouse connectors
∗ Floppy disk drive connector x1
∗ Parallel port x1
∗ Serial port x1
∗ USB2.0 connector x4
∗ USB2.0 headers x4 (connecting cable option)
∗ Audio connector (Line-in, Line-out, MIC)
Description
2
Advertisement
Table of Contents
