Daikin Inverter FTXL20G2V1B Operation Manual page 25

WEEKLY TIMER Operation
8. Press "SELECT button" to
select the desired temperature.
• The temperature can be set between
10°C and 32°C.
Cooling: The unit operates at 18°C even
if it is set at 10 to 17°C.
Heating: The unit operates at 30°C even
if it is set at 31 to 32°C.
• To return to the time setting, press "BACK button".
• The set temperature is only displayed
when the mode setting is on.
9. Press "NEXT button".
• The temperature will be set and go to
the next reservation setting.
• To continue further settings, repeat the
procedure from STEP 2.
10.Press "
complete the setting.
• Point the remote controller toward the
air conditioner and press the buttons to
operate. The air conditioner will beep
and the operation lamp will flash.
• The TIMER lamp lights up.
NOTE
■ WEEKLY TIMER
• Do not forget to set the time on the remote control first.
• The day of the week, ON/OFF time can be set with WEEKLY TIMER. For ON-TIMER, settings
other than the above are based on the remote controller settings just before the operation.
• Both WEEKLY TIMER and ON/OFF timer cannot be used at the same time. The ON/OFF
timer has priority if it is set while WEEKLY TIMER is still active. WEEKLY TIMER is activated
after the reserved ON/OFF timer is completed.
• The "WEEKLY button" activates or deactivates the reservation.
• To set WEEKLY TIMER, press "
• Only the time and set temperature set with the weekly timer are sent with the "
Set the weekly timer only after setting the operation mode, the fan strength, and the fan direction ahead of time.
• Up to 4 settings per day and up to 28 settings per week can be reserved with WEEKLY TIMER. If a reservation
deactivated with "WEEKLY button" is activated once again, the last reservation mode will be used.
• Shutting the breaker off, power failure, and other similar events will render operation of the
indoor unit's internal clock inaccurate. Reset the clock. (page 8.)
• The "BACK button" can be used only for the mode, time and temperature settings.
It cannot be used to go back to the reservation number.
24
button" to
button" and make a reservation according to the procedures.
10
9
8
button".