Safety Considerations
The UPS cabinet and parallel cabinet enclosures are designed for industrial or
computer room applications, and contain safety shields behind the doors.
However, the parallel redundant system is a sophisticated power system and
should be handled with appropriate care, following these guidelines:
·
Keep surroundings clean and free from excess moisture.
·
Do not operate the parallel redundant system close to gas or electric heat
sources.
·
The system is not intended for outdoor use.
·
The operating environment should be maintained within the parameters
stated in this manual and the Powerware 9315 Operation manual provided
with the UPS system.
·
Keep the cabinet doors closed to ensure proper cooling airflow and to
protect personnel from dangerous voltages inside the unit.
·
The parallel redundant system contains its own power source. Lethal
voltages are present even when the UPS is disconnected from utility
power.
WARNING:
Only AUTHORIZED SERVICE PERSONNEL should perform service or
maintenance on the parallel redundant system.
If service or routine maintenance is required:
·
Ensure all power is disconnected before performing installation or service.
·
Ensure the area around the parallel redundant system is clean and
uncluttered.
·
Battery cabinet maintenance or battery replacement should be performed
only by authorized service personnel.
·
Observe all DANGER, CAUTION, and WARNING notices affixed to the
inside and outside of the equipment.
·
Refer to the more detailed safety precautions described in the Powerware
9315 Operation manual provided with the UPS system.
Powerware 9315 Parallel Redundant System I & O
164202013 Rev. D 041599
31