Client Bridge; Wireless Network - EnGenius ENH700EXT User Manual

Wireless outdoor dual radio 802.11a/b/g/n access point

Hide thumbs Also See for ENH700EXT:

Table of Contents

7.2 Client Bridge

When Client Bridge is the selected mode of operation for either the 2.4GHz or 5GHz bands, two

options will be available to configure. The two options that can be configured are Wireless

Network and Wireless Advanced Settings.

Wireless Mode

SSID

Preferred BSSID

Security Mode

Select the wireless mode that the current band of operation

will use. The options are:

1) 802.11 b/g/n Mixed

2) 802.11 b

3) 802.11 b/g Mixed

4) 802.11 g

5) 802.11 n only

In Specify the static SSID, enter the name of the Access Point

the client will connect to. This area is automatically filled out

if an access point in Site Survey is selected.

Specify the MAC address of the Access Point the client will

connect to. This section will be filled if an access point in Site

Survey is selected.

Set the security options for the client bridge. For more

information on Wireless Security, refer to Chapter 8 (Page

23).

Table of Contents