Motorola PR400 Commercial Series User Manual page 72

Operate on both ltr trunked and conventional radio systems
Hide thumbs Also See for PR400 Commercial Series:
Table of Contents

Advertisement

Restore Channels/Talkgroups to the Scan List
Power off the radio then turn it on. – OR – Press the preprogrammed Scan button
to stop the scan. The deleted nuisance channels/talkgroups are restored to the
scan list. – OR – Select a channel/talkgroup that has not been preprogrammed for
scan by your dealer/programmer. Once you return to the original channel/
talkgroup, the deleted nuisance channels/talkgroups are restored to the scan list.
Send a Selective Call
1. From the Selective Call menu, select or enter desired radio ID number.
2. Press PTT button to send the call.
3. Press and hold the PTT button to speak; release to listen.
Receive a Selective Call
1. When a Selective Call is received, the radio displays
the calling radio; the LED flashes yellow and two tones are heard.
2. Press PTT button to acknowledge the call.
3. Press and hold the PTT button to speak; release to listen.
LED Indicators
LED State/Color
Radio Call
Red
Transmitting
Flashing Red
Receiving
Flashing Red
Channel/Talkgroup Busy
Scan
Flashing Green
Scanning for activity
Call Alert
Flashing Yellow
Indicates receiving a Call Alert
Yellow
Indicates sending a Call Alert
Selective Call
Flashing Yellow
Indicates receiving a Selective Call
Yellow
Indicates sending a Selective Call
Sticky Monitor/Open Squelch
Yellow
While monitoring
F
and the name or ID of
Indication
Audio Indicators for Programmable Buttons
Programmable Buttons
Scan
Power Level
Squelch
Repeater/Talkaround
VOX
Silent Monitor/Open Squelch
Revert Memory Channel (1&2)
Store Memory Channel (1&2)
Home Revert AutoKey (1&2)
J
Menu Mode
Radio Call
Scan List Edit
Phone Mode
Option Board
Escalert
You can check battery charge status if your dealer has preprogrammed
one of the programmable buttons. Hold down the preprogrammed Bat-
tery Indicator button. The charge status is shown on the display.
Battery
Level
Full
Good
Fair
Low
Very Low
Positive
Negative
Indicator Tone
Indicator Tone
Start
Stop
High
Low
Tight
Normal
Does not use
Uses repeater
repeater
Enabled
Disabled
Enabled
Enabled
Stored
Enabled
Accessed
Enabled
Enabled
Enabled
Enabled
Disabled
Enabled
Disabled
Display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents