Operation; Cancelling And Resetting The Programme; Start Delay - Hoover 9 kg Vision HD Instruction Book

9 kg classe b condensation condenser tumble dryer
Table of Contents

Advertisement

Available languages

Available languages

40005241Eng.qxd
05/09/2007

Operation

1.
Open the door and load the drum with laundry. Ensure that garments do
not hinder closure of the door.
2.
Gently close the door pushing it slowly until you hear the door 'click'
shut.
3.
Press the 'Marche Arrêt' button to switch on the dryer. The indicator will
light up and the START indicator will flash.
4.
Turn the Programme Selector dial to select the required drying
programme (see Programme Guide).
5.
If drying synthetics, acrylics or delicate items, press the 'Choix Textile'
button to reduce the heat level.
The light above the push button will light up when the machine is in low
heat setting. To deselect this status when the drying cycle has started it is
necessary to reset the machine.
6.
Press the 'Départ Pause' button. The dryer will start automatically and
the START indicator will be continuously lit.
7.
The display will show the drying progress in terms of time remaining.
8.
If the door is opened during the programme to check the laundry, it is
necessary to press 'Départ Pause' to recommence drying after the door
has been closed.
9.
When the 15' indicator is lit the machine will enter the cool down phase,
the clothes will be tumbled in cool air allowing the load to cool down.
10.
When the programme is complete the STOP indicator will light.
Cancelling and resetting the
programme
To cancel a programme switch the machine off and on again. The machine will
indicate that it has been reset by the START indicator flashing.

Start Delay

The 'Départ Différé' Function allows the user to delay the start of the drying
cycle by 6 or 9 hours.
When the function is first selected the display will
show a delay of 6 hours, a subsequent press of the
button will increase the delay to 9 hours.
To commence the programme press 'Départ Pause'
and the appliance will complete the drying cycle at
the end of this time. The 6 or 9 hour indicator light
will flash to indicate that the start delay is in
progress.
16
11:44
Page 16
WARNING!
The drum, door
and load may be
very hot.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vision hd

Table of Contents