Controls And Indicators - Hoover 9 kg Vision HD Instruction Book

40005241Eng.qxd 05/09/2007

Controls and indicators

PROGRAMME
SELECTOR
Control panel and indicator lights
Programme Selector – Select the required programme
'Marche Arrêt' button and indicator – Press to switch on, the indicator will light
'Départ Différé' button – Allows the user to delay the start of the drying cycle (see
details of operation page 16)
'Départ Pause' – Press 'Départ Pause' to commence the selected drying programme
'Choix Textile' button – Press to reduce the heat level for delicate items, the indicator
above the button will light up. To change the heat setting the programme must be reset
Low Heat – Indicator light ON
'Réservoir Plein' indicator – lights when the water container is full
'Entretien Filtre' indicator – lights when the filter needs cleaning
Display
START – When the dryer is switched on the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' – Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP – Indicator lights when the programme is finished.
6h – 6 hour start delay (light flashes when in operation)
9h – 9 hour start delay (light flashes when in operation)
14:08 Page 11
COUNTDOWN
EMPTY WATER
INDICATOR
(Réservoir Plein)
ACRYLICS/ START PAUSE
SYNTHETICS BUTTON
BUTTON (Départ
(Choix Textile) Pause)
High Heat – Indicator light OFF
FILTER CARE INDICATOR
DISPLAY (Entretien Filtre)
START DELAY
BUTTON
(Départ
Différé)
ON/OFF
BUTTON
(Marche
Arrêt)
11