Cobra Marine MRF55 EU Owner's Manual page 34

DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
Sending a Position Send
Position Send uses your connected GPS in similar fashion to the position
request function, except that you initiate the activity to let another station
know where you are.
Customer
Installation
Assistance
To send a position send message:
Standby Mode
Secondary Icons
1. In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
Notice Caution Warning
Position Send
(position send).
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
(position send). You will have two choices.
Individual Directory
Resend your position to the same station.
Exit from Position Send mode.
a. To resend your position:
1) Use the Up/Down buttons to select
Transmit Position
2) Press the Call/Set button to resend your position.
b. To exit from the position send mode:
1) Use the Up/Down buttons to select
2) Press the Call/Set button to return to the
Call Send menu.
Send/Exit
62 English
POS SEND
POS SEND
.
SEND
.
EXIT
DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
Receiving a Position Send
When another station sends you its position in Position Send mode,
the individual alarm will sound and the station's name and position will
be shown on the LCD. Press any button to turn off the alarm and return
Customer
Installation
Assistance
to Standby mode.
Secondary Icons
Position Send
Notice Caution Warning
Nothing comes close to a Cobra ® 63