Cobra Marine MRF55 EU Owner's Manual page 31

DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
Receiving an Individual Call
Caller Identified
When another station makes an Individual call to your radio,
the individual alarm will sound, the caller will be identified
on the LCD and your radio will be switched to the channel
Customer
Installation
Assistance
selected by the caller. Press any button to turn off the alarm.
Secondary Icons
To receive an individual call:
1. Press the Talk button and greet the caller —
almost as if you were answering the telephone.
Sending a Group Call
Notice Caution Warning
Sending a Group call is very similar to sending an individual call, except that
the group MMSI is used and the resend and DSC responses do not apply.
To send a group call:
Standby Mode
1. In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
Group
4. Press the Call/Set button to move to the send
or exit menu.
5. Use the Up/Down buttons to select
6. Press the Call/Set button to send the message or
return to the Call Send menu if
Send/Exit
All radios will be switched to the channel selected in
step 1. Press and hold the Talk button to send your
voice message to everyone in the group.
Anyone in the group can now also transmit on
that channel.
Group Waiting
56 English
.
GROUP
or .
SEND EXIT
was chosen.
EXIT
DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
Receiving a Group Call
When another station makes a Group call to your radio, the individual alarm
will sound, the caller will be identified on the LCD and your radio will be
switched to the channel selected by the caller, just as for an individual call.
Customer
Installation
Assistance
Press any button to turn off the alarm.
Secondary Icons
To receive a group call:
Caller Identified
1. Listen for the group voice message.
2. Press the Talk button and respond
only if appropriate.
Notice Caution Warning
Call Log
The Call Log logs all DSC calls directed to
the radio. It captures the caller's name, the type
of call and their position.
To review calls received while in DSC Standby mode:
Call Log
1. From Standby mode, press the Call/Set
button to enter the Call Send menu.
2. Use the Up/Down buttons to select
3. Press the Call/Set button to enter Call Log mode.
4. Use the Up/Down button to move from message to
message in the call log.
5. Press the Call/Set button to return to Standby mode.
Standby Mode
Sending a Position Request
Position Request mode enables a DSC radio to obtain the
position (latitude and longitude) of a station that has a GPS
device connected to the DSC radio at that station.
To request the position of another station:
Position Request
1. In Standby mode, select a channel on which
you want to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
(position request) on the menu.
4. Press the Call/Set button to enter the Individual
Directory menu.
Individual Directory
5. Use the Up/Down buttons to scroll to the name of the
station whose position you want to request.
.
CALL LOG
POS REQST
Nothing comes close to a Cobra ® 57