Cobra Marine MRF55 EU Owner's Manual page 27

DSC Set-Up
Operating Your Radio
Intro Operation Customer Warranty
Assistance
Position Request Reply Type
The ability to send your position to another station is an added feature of DSC
radios that have GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine ™ VHF radio allows you to choose whether to have the radio
Customer
Installation
Assistance
automatically respond to all Position Requests it receives or to alert you to a
Secondary Icons
Position Request and allow you to choose whether to respond or not —
manual reply.
To set the position request reply type:
Position Reply
1. Enter the Settings menu and scroll to
Notice Caution Warning
POS RPLY
Up/Down buttons.
2. Press the Call/Set button and observe
the current setting —
3. Use the Up/Down buttons to change the setting.
Auto/Manual/Exit 4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to
6. Press the Call/Set button to return to the
Settings menu.
Individual Directory
DSC calling allows you to call another vessel or station directly if you know its
MMSI number. Your CobraMarine ™ VHF radio allows you to store up to ten names
and their associated MMSI numbers for quick access.
To enter or edit names and your
Individual Directory
MMSI numbers in the directory:
1. Enter the Settings menu and scroll to
(individual directory) with the Up/Down buttons.
2. Press the Call/Set button to enter a
memory location (1-10).
3. Use the Up/Down buttons to scroll through the
memory locations to one you want to select.
Location 01
48 English
(position reply) with the
or .
AUTO MANUAL
.
EXIT
INDV DIR
DSC Set-Up
Main Icons
Operating Your Radio
Intro Operation Customer Warranty
Assistance
4. Press the Call/Set button to select the memory location.
New Individual
The cursor will begin to blink at the first character under
.
NAME
Intro Operation Customer Warranty
Assistance
5. Use the Up/Down buttons to scroll through the character list.
Customer
Installation
Assistance
6. Press the Call/Set button to select a character. This will also
Secondary Icons
move the blinking cursor to the next character under
Customer
Installation
Assistance
7. Repeat steps 5 and 6 to enter additional characters —
Secondary Icons up to a maximum of nine — for the name.
NOTE
Notice Caution Warning
Press the High/Low Power button to backspace
Notice Caution Warning
and erase the last selected character.
8. After entering the name, press and hold the Call/Set
button to move the blinking cursor to the first character
under .
MMSI
9. Use the Up/Down buttons to scroll through the number list.
Enter MMSI
10. Press the Call/Set button to select the number and
move the cursor to the next character under
11. Repeat steps 9 and 10 until the nine digit MMSI
is entered.
Next/Exit 12. Press and hold the Call/Set button to move to the
next memory location or exit.
13. Select or
NEXT
If is selected, pressing the Call/Set button will
NEXT
move to the next memory location where another
name can be entered by repeating steps 3 – 11.
If is selected, pressing the Call/Set button
EXIT
will return you to the Settings menu.
You can enter a total of ten names and MMSI
numbers in the directory.
.
NAME
.
MMSI
with the Call/Set buttons.
EXIT
Nothing comes close to a Cobra ® 49