2.
Remove the speakers (2) from the computer.
Reverse this procedure to install the speakers.
Smart card board
Description
Smart card board (includes cable)
Before removing the smart card reader, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Hard drive cover (see
b.
Hard drive (see
c.
Service cover (see
d.
Keyboard (see
e.
Base enclosure (see
f.
Fan (see
g.
System board (see
Battery on page
Hard drive cover on page
Hard drive/SSD drive on page
Service cover on page
Keyboard on page
Base enclosure on page
Fan on page
68)
System board on page
41).
47)
48)
53)
60)
63)
69)
Component replacement procedures
Spare part number
702844-001
75