Table of Contents
Advertisement
Event ID code
0434
0482
0484
0485
0433
0481
0483
04FE
0479
04FF
0894
0898
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option.
Cause and solution
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
Cannot display the transferred images. Restart the EasyMP Network Projection
program.
Communication with computer was disconnected. Restart the EasyMP Network
Projection program.
The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the EasyMP Network Projection
program and restarting your projector. If that does not solve the problem, contact
Epson for help.
Projector Information Display - Info Menu
102
Advertisement
Table of Contents
