1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite 1850W
  6. User manual

Epson PowerLite 1850W User Manual

Epson powerlite 1850w: user guide
Hide thumbs Also See for PowerLite 1850W:
Table of Contents

Advertisement

Quick Links

Download this manual
®
PowerLite
1850W/1870/1880
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite 1850W

Summary of Contents for Epson PowerLite 1850W

  • Page 1 ® PowerLite 1850W/1870/1880 User's Guide...

  • Page 3: Table Of Contents

    Projector Part Locations ... 14 Projector Parts - Front/Top ... 15 Projector Parts - Rear ... 16 Projector Parts - Base... 18 Projector Parts - Control Panel ... 19 Projector Parts - Remote Control... 20 Setting Up the Projector ... 22 Projector Placement... 22 Projector Setup and Installation Options ...
  • Page 4 Connecting to External Speakers ... 33 Connecting to External USB Devices ... 34 USB Device Projection... 34 Connecting a USB Device or Camera to the Projector... 34 Selecting the Connected USB Source ... 35 Disconnecting a USB Device or Camera From the Projector... 35 Connecting to a Document Camera ...
  • Page 5 Password Security Types ... 80 Setting a Password ... 81 Selecting Password Security Types... 81 Entering a Password to Use the Projector ... 82 Saving a User's Logo Image to Display... 84 Locking the Projector's Buttons ... 85 Unlocking the Projector's Buttons ... 86...
  • Page 6 Image Quality Settings - Image Menu ... 90 Input Signal Settings - Signal Menu ... 91 Projector Feature Settings - Settings Menu... 94 Projector Setup Settings - Extended Menu ... 96 Projector Network Settings - Network Menu... 99 Projector Information Display - Info Menu ... 100 Event ID Code List...
  • Page 7 Solutions When the Image Brightness or Colors are Incorrect ... 127 Solutions When There is No Sound or Low Volume ... 127 Solving Projector or Remote Control Operation Problems ... 128 Solutions to Projector Power or Shut-Off Problems... 128 Solutions to Problems with the Remote Control ... 129 Solutions to Password Problems ...

  • Page 9: Introduction To Your Projector

    The PowerLite 1850W, 1870, and 1880 projectors include these special features: Bright, high-resolution projection system • PowerLite 1850W: Up to 3700 lumens of brightness (white light output and color light output) PowerLite 1870/1880: Up to 4000 lumens of brightness (white light output and color light output) •...

  • Page 10: Product Box Contents

    Introduction to Your Projector Related concepts Projector Part Locations Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping. Make sure your projector box included all of these parts:...
  • Page 11 Projector Remote control Remote control batteries (two AA alkaline) Power cord VGA computer cable Password Protected sticker Projector documentation CD Projector software CD (PowerLite 1880) Parent topic: Projector Features...

  • Page 12: Additional Components

    Parent topic: Projector Features Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online www.epsonstore.com Epson offers the following optional accessories and replacement parts for your projector:...

  • Page 13: Warranty And Registration Information

    In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.

  • Page 14: Notations Used In The Documentation

    EasyMP Network Projection Operation Guide installed with this manual from your projector CD. • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".

  • Page 15: Projector Parts - Front/Top

    Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top Exhaust vent Projector status lights Lamp cover Control panel Horizontal keystone slider Air filter cover latch Air filter cover Zoom ring...

  • Page 16: Projector Parts - Rear

    A/V Mute slide Front adjustable foot Foot release lever A/V Mute slide lever Remote receiver Parent topic: Projector Part Locations Projector Parts - Rear HDMI port Computer1 port Computer2 port USB TypeB port USB TypeA port Network (LAN) port (PowerLite 1880)
  • Page 17 Speaker Kensington security slot RS-232C port Audio2 port Audio Out port Monitor Out port Audio1 port L-Audio-R audio ports Video port S-Video port AC input port Parent topic: Projector Part Locations...

  • Page 18: Projector Parts - Base

    Projector Parts - Base Mounting bracket holes Front adjustable foot Rear feet Security cable attachment point Parent topic: Projector Part Locations...

  • Page 19: Projector Parts - Control Panel

    Projector Parts - Control Panel Power button Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Volume buttons (adjust speaker volume), horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons...

  • Page 20: Projector Parts - Remote Control

    Projector Parts - Remote Control Power button...
  • Page 21 Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions) Enter button (selects options and controls wireless mouse functions)

  • Page 22: Setting Up The Projector

    • Place the projector on a sturdy, level surface or install it using a compatible mount. • Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.
  • Page 23 Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.

  • Page 24: Projection Distance

    The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings.

  • Page 25: Projector Connections

    • For slide shows without a computer, you can connect USB devices (such as a flash drive or camera) or an optional Epson document camera. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.

  • Page 26: Connecting To Computer Sources

    Connecting to a Computer for USB Video and Audio If your computer meets the system requirements, you can send video and audio output to the projector through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a USB cable.

  • Page 27: Connecting To A Computer For Vga Video

    4. Tighten the screws on the VGA connectors. Parent topic: Connecting to Computer Sources Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.

  • Page 28: Connecting To A Computer For Usb Mouse Control

    Connecting to a Computer for USB Mouse Control If you connected your computer to a Computer, USB TypeB, or HDMI port on the projector, you can set up the remote control to act as a wireless mouse. This lets you control computer presentations at a distance from your computer.

  • Page 29: Connecting To A Computer For Sound

    Connecting to an S-Video Video Source Connecting to a Video Source for Sound Parent topic: Projector Connections Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.

  • Page 30: Connecting To A Component-To-Vga Video Source

    Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using a component- to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable.

  • Page 31: Connecting To A Composite Video Source

    Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Connect the cable with the yellow connector to your video source's yellow video output port.

  • Page 32: Connecting To An External Computer Monitor

    • Connect the other end of the cable to the projector's Audio port that corresponds to the Computer port you are using for video. • Connect the red and white plugs on the other end of the cable to the projector's L-Audio-R ports. L-Audio-R ports...

  • Page 33: Connecting To External Speakers

    You can control the volume using the projector's remote control. Note: The projector's built-in speaker system is disabled when you connect external speakers. 1. Make sure your computer or video source is connected to the projector with both audio and video cables as necessary.

  • Page 34: Connecting To External Usb Devices

    Projecting a Slide Show Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB TypeA port and use it to project images and other content. 1. If your USB device came with a power adapter, plug the device into an electrical outlet.

  • Page 35: Selecting The Connected Usb Source

    2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB TypeA port shown here. Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.

  • Page 36: Connecting To A Document Camera

    Connecting to a Document Camera You can connect a compatible Epson document camera to your projector's USB TypeA port to project images viewed by the camera. Note: You may be able to connect different Epson document camera models to your projector's Computer port.
  • Page 37 1. Open the battery cover as shown. 2. Insert the batteries with the + and – ends facing as shown.

  • Page 38: Opening The Lens Cover

    Setting Up the Projector Opening the Lens Cover 1. To open the projector's lens cover, slide the A/V Mute slide lever. 2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed.

  • Page 39: Using The Projector On A Network

    EasyMP Network Projection Operation Guide installed from your projector CD for instructions. • EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. You can download the latest software and documentation from the Epson web site. Go to www.epson.com/support...

  • Page 40: Selecting Wired Network Settings

    Before you can project from multiple computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port. 1. Turn on the projector.
  • Page 41 4. Select Network Configuration and press Enter. 5. Select the Basic menu and press Enter. 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
  • Page 42 • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. You must enter a displayed, randomized keyword from a computer using the EasyMP Network Projection software to access the projector.

  • Page 43: Using Quick Wireless Connection (Windows Only)

    Wired Network Projection Using Quick Wireless Connection (Windows Only) You can use the optional Epson Quick Wireless Connection USB key to quickly connect the projector to a Windows computer wirelessly (PowerLite 1880). Then you can project your presentation and remove the key when you are done.
  • Page 44 Note: Your e-mail address can be up to 32 alphanumeric characters long. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

  • Page 45: Network Projector E-Mail Alert Messages

    • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Parent topic: Setting Up Projector Network E-Mail Alerts...

  • Page 46: Controlling A Networked Projector Using A Web Browser

    Using the Projector on a Network Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely.
  • Page 47 2. Start your web browser on a computer connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen. 4. To select projector menu settings, select the name of the menu and follow the on-screen instructions to select settings.

  • Page 48: Crestron Roomview Support

    Crestron RoomView lets you control and monitor your projector using a web browser. Note: You cannot use the Epson Web Control feature or the Message Broadcasting plug-in for EasyMP Monitor when you use Crestron RoomView.

  • Page 49: Controlling A Networked Projector Using Crestron Roomview

    Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1. Start your web browser on a computer connected to the network.
  • Page 50 • Menu displays the Configuration menu 5. To view information about the projector, click the Info tab. 6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the displayed screen, and click Send. 7. When you finish selecting settings, click Exit to exit the program.

  • Page 51: Using Basic Projector Features

    Controlling the Volume With the Volume Buttons Projecting a Slide Show Turning On the Projector Turn on the computer or video equipment you want to use before you turn on the projector so it can display the image source. 1. Open the projector's lens cover.
  • Page 52 The projector beeps and the power light flashes green as the projector warms up. After about five seconds, the power light stops flashing and turns green. Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is especially dangerous for children.

  • Page 53: Turning Off The Projector

    2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the power light turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away.
  • Page 54 3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.

  • Page 55: Selecting The Language For The Projector Menus

    Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter.
  • Page 56 2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height.

  • Page 57: Image Shape

    You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality.

  • Page 58: Correcting Image Shape With The Keystone Buttons

    Correcting Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

  • Page 59: Correcting Image Shape With Quick Corner

    Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image.
  • Page 60 3. Select the Settings menu and press Enter. 4. Select the Keystone setting and press Enter. 5. Select the Quick Corner setting and press Enter. You see the Quick Corner adjustment screen.

  • Page 61: Resizing The Image With The Zoom Ring

    6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc.

  • Page 62: Remote Control Operation

    Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen, or the front or back of the projector.

  • Page 63: Using The Remote Control As A Wireless Mouse

    ± 30º Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.

  • Page 64: Using The Remote Control As A Presentation Pointer

    Using the Remote Control as a Presentation Pointer You can use the projector's remote control as a pointer to help you call out important information during a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the Settings menu.

  • Page 65: Selecting An Image Source

    Projector Feature Settings - Settings Menu Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1. Make sure the connected image source you want to use is turned on.

  • Page 66: Projection Modes

    Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen.

  • Page 67: Changing The Projection Mode Using The Menus

    You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus. 1. Turn on the projector and display an image. 2. Press the Menu button. 3. Select the Extended menu and press Enter.

  • Page 68: Image Aspect Ratio

    Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control.

  • Page 69: Available Image Aspect Ratios

    You can select the following image aspect ratios, depending on the input signal from your image source. Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal. PowerLite 1850W Aspect ratio setting Auto...

  • Page 70: Color Mode

    Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use.

  • Page 71: Available Color Modes

    Available Color Modes You can set the projector to use these Color Modes, depending on the input source you are using: Color Mode Presentation Dynamic Theatre Sports sRGB Blackboard Whiteboard Photo Parent topic: Color Mode Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project.

  • Page 72: Controlling The Volume With The Volume Buttons

    2. Press the Volume buttons as necessary to lower or raise the volume. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, you can set the volume using a projector menu.

  • Page 73: Projecting A Slide Show

    Projector Feature Settings - Settings Menu Projecting a Slide Show You can use your projector's Slideshow feature whenever you connect a USB device that contains compatible image files. This lets you quickly and easily display a slide show, and control it using the projector's remote control.

  • Page 74: Starting A Slide Show

    Projecting a Slide Show Starting a Slide Show After connecting a USB device to the projector, you can switch to the USB input source and start your slide show. Note: You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter.
  • Page 75 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. •...

  • Page 76: Slideshow Display Options

    Related tasks Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the projector's Slideshow feature. Setting Display Order Sort Order Continuous Play Screen Switching Time Options Description Name Order...
  • Page 77 Setting Options Effect Wipe Dissolve Random Parent topic: Starting a Slide Show Description Transitions between images with a wipe effect Transitions between images with a dissolve effect Transitions between images using a random variety of effects...

  • Page 78: Adjusting Projector Features

    1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound. 2. To turn the picture and sound back on, press A/V Mute again. Note: You can also stop projection using the A/V Mute slide lever on the projector. Parent topic:...

  • Page 79: Stopping Video Action Temporarily

    2. To restart the video action in progress, press Freeze again. Parent topic: Adjusting Projector Features Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen.

  • Page 80: Projector Security Features

    Adjusting Projector Features Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings.

  • Page 81: Setting A Password

    7. Make a note of the password and keep it in a safe place in case you forget it. Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see the Password Protect menu. Select the password security types you want to use. PowerLite 1850W/1870 PowerLite 1880...

  • Page 82: Entering A Password To Use The Projector

    If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect, press Enter, select On, press Enter again, and press Esc.
  • Page 83 • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.

  • Page 84: Saving A User's Logo Image To Display

    Saving a User's Logo Image to Display You can transfer an image to the projector and then display it whenever the projector turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using the A/V Mute feature).

  • Page 85: Locking The Projector's Buttons

    You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.

  • Page 86: Unlocking The Projector's Buttons

    Unlocking the Projector's Buttons Parent topic: Projector Security Features Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them. Parent topic: Locking the Projector's Buttons Installing a Security Cable You can install two types of security cables on the projector to deter theft.

  • Page 87: Creating A User Pattern To Display

    • Use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
  • Page 88 You see a prompt asking if you want to use the displayed image as a User Pattern. 5. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.

  • Page 89: Adjusting The Menu Settings

    Projector Reset Options - Reset Menu Using the Projector's Menus You can use the projector's menus to adjust the settings that control how your projector works. The projector displays the menus on the screen. 1. Press the Menu button on the control panel or remote control.

  • Page 90: Image Quality Settings - Image Menu

    You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.

  • Page 91: Input Signal Settings - Signal Menu

    Available Color Modes Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
  • Page 92 Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source. Setting Options Auto Setup...
  • Page 93 Setting Options Progressive Video Film/Auto Noise Reduction HDMI Video Range Normal Expanded Auto Input Signal Auto Component Video Signal Auto Various video standards Aspect See the list of available aspect ratios Description Sets whether to convert interlaced-to-progressive signals for certain video image types Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer...

  • Page 94: Projector Feature Settings - Settings Menu

    Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Options Description Auto Changes the projected image ratio to make the edges visible by...
  • Page 95 Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Adjusts the volume of projector’s speaker system or external speakers Limits reception of remote control signals by the selected receiver; Off turns off all receivers...

  • Page 96: Projector Setup Settings - Extended Menu

    Parent topic: Adjusting the Menu Settings Related tasks Correcting Image Shape with Quick Corner Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Options Description Power Consumption...
  • Page 97 Startup Screen: controls whether a special screen appears when the projector starts A/V Mute: selects the screen color or logo to display when A/V Mute is turned on Controls use of closed captions...
  • Page 98 Selects the way the projector faces the screen so the image is oriented correctly Selects various operation options Direct Power On: automatically turns on the projector when you plug it in Sleep Mode: automatically turns off the projector after an interval of inactivity...

  • Page 99: Projector Network Settings - Network Menu

    Language Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network (PowerLite 1880). Options Description Communication On...

  • Page 100: Projector Information Display - Info Menu

    Adjusting the Menu Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.

  • Page 101: Event Id Code List

    Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Displays the name of the port to which the current input source is...

  • Page 102: Projector Reset Options - Reset Menu

    Projector Information Display - Info Menu Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu. You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset...
  • Page 103 You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • User Button Parent topic: Adjusting the Menu Settings...

  • Page 104: Maintaining And Transporting The Projector

    Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation. The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.

  • Page 105: Cleaning The Projector Case

    Projector Maintenance Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. 1. Turn off the projector and unplug the power cord.
  • Page 106 2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

  • Page 107: Replacing The Air Filter

    • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling, if necessary. The illustrations here show the projector placed on a table.

  • Page 108: Projector Lamp Maintenance

    Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover.

  • Page 109: Replacing The Lamp

    Projector Lamp Specifications Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary.
  • Page 110 4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
  • Page 111 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
  • Page 112 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press the handle down. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
  • Page 113 8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.

  • Page 114: Resetting The Lamp Timer

    Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.

  • Page 115: Replacing The Remote Control Batteries

    Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
  • Page 116 Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote Control Operation...

  • Page 117: Transporting The Projector

    • Remove any equipment connected to the projector. • When transporting the projector a long distance or as checked luggage, pack it in a firm box with cushioning around it and mark the box "Fragile." • When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector.

  • Page 118: Solving Problems

    Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it If this does not solve the problem, check the following: • The lights on the projector may indicate what the problem is.
  • Page 119 Standby or sleep mode. Preparing for monitoring or shutting down. (When the light remains orange, you can unplug the projector.) Projector is too hot. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
  • Page 120 Flashing red Red or flashing Flashing red Flashing red Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related references...

  • Page 121: Using The Projector Help Displays

    Replacing the Lamp Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Help button on the projector or the remote control.

  • Page 122: Solutions When No Image Appears

    • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources. • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.

  • Page 123: Solutions When "No Signal" Message Appears

    • With Windows Media Center, reduce the screen size from full screen mode. • With Windows DirectX, turn off DirectX functions. • Turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer. Parent topic:...

  • Page 124: Displaying From A Mac Laptop

    • Make sure the correct input signal is selected on the Signal menu. • Make sure the computer's display resolution does not exceed the projector's resolution and frequency limit. If necessary, select a different display resolution for your computer. (See your computer manual for details.)

  • Page 125: Solutions When The Image Is Not Rectangular

    If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust the image shape.

  • Page 126: Solutions When The Image Is Fuzzy Or Blurry

    • Adjust the image focus. • Clean the projector lens. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen.

  • Page 127: Solutions When The Image Brightness Or Colors Are Incorrect

    Contrast, Tint, Color Adjustment, and/or Color Saturation. • Make sure you selected the correct input source on the Signal menu. • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.

  • Page 128: Solving Projector Or Remote Control Operation Problems

    • Make sure any connected audio cables are labelled "No Resistance". • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. Parent topic:...

  • Page 129: Solutions To Problems With The Remote Control

    • If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. • If you lose the remote control you cannot enter a password. Order a new one from Epson. Parent topic:...

  • Page 130: Solutions When Network Alert E-Mails Are Not Received

    To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it's free. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period.
  • Page 131 • Computer or video configuration • Description of the problem Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online www.epsonstore.com (U.S.

  • Page 132: Technical Specifications

    Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats USB Display System Requirements...
  • Page 133 Brightness PowerLite 1850W: Normal Power Consumption mode: White light output 3700 lumens (ISO 21118 standard) Color light output 3700 lumens ECO Power Consumption mode: White light output 2960 lumens (ISO 21118 standard) PowerLite 1870/1880: Normal Power Consumption mode: White light output 4000 lumens (ISO 21118 standard)

  • Page 134: Projector Lamp Specifications

    Keystone correction angle USB Type B port compatibility USB 1.1 and 2.0 compliant for USB display or external mouse USB Type A port compatibility USB 1.1 and 2.0 compliant port for USB device input or Epson Parent topic: Technical Specifications...

  • Page 135: Projector Dimension Specifications

    100 to 240 VAC 3.9 to 1.8 A Operating: Normal Power Consumption mode: 381 W ECO Power Consumption mode: 309 W Standby: PowerLite 1850W/1870: 0.27 W (Communication Off), 3.5 W (Communication On) PowerLite 1880: 0.27 W (Communication Off), 4 W (Communication On)

  • Page 136: Projector Environmental Specifications

    Operating: Normal Power Consumption mode: 363 W ECO Power Consumption mode: 297 W Standby: PowerLite 1850W/1870: 0.33 W (Communication Off), 3.7 (Communication On) PowerLite 1880: 0.33 W (Communication Off), 4.3 W (Communication On) Operating: 41 to 95 ºF (5 to 35 ºC) Storage: 14 to 140 ºF (–10 to 60 ºC)

  • Page 137: Supported Video Display Formats

    For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
  • Page 138 SDTV (480i/480p) SDTV (576i/576p) HDTV (720p) 50/60 HDTV (1080i) 50/60 HDTV (1080p) 24/30/50/60 * PowerLite 1850W only Resolution (in pixels) 720 × 480 720 × 576 720 × 576 720 × 480 720 × 576 720 × 480 720 × 576 1280 ×...

  • Page 139: Usb Display System Requirements

    ** Available only when using the Wide option as the Resolution setting Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software. Requirement Windows Operating system...

  • Page 140: Notices

    Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.

  • Page 141: Important Safety Instructions

    • Do not look into the lens when the projector is on. The bright light can damage your eyes. • Do not place the projector on an unstable cart, stand, or table. • Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 30° forward or back.
  • Page 142 • Do not use the projector where it may be exposed to smoke, corrosive gases, or excessive dust. • Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle.

  • Page 143: Fcc Compliance Statement

    • Do not disassemble the lamp or subject it to impacts. • Do not place the source of an open flame, such as a lit candle, on or near the projector. • Do not block the lens during projection using a book or any object other than the lens cover. Use the lens cover to temporarily stop projection, but avoid projecting with the lens cover closed for a long period.

  • Page 144: Trademarks

    Notices Trademarks ® ® ® Epson , PowerLite , and Instant Off are registered trademarks, and Epson Exceed Your Vision is a registered logomarkof Seiko Epson Corporation. ® ® PrivateLine and Accolade are registered trademarks; SizeWise , Duet , and BrightLink Solo trademarks;...

  • Page 145: Software Copyright

    We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide.
  • Page 146 • EPSON original drivers The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/gpl.html GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright ©) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street , Fifth Floor, Boston , MA...
  • Page 147 proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0.
  • Page 148 normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
  • Page 149 the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License.
  • Page 150 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 151 END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
  • Page 152 We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, contact Epson as described in the User's Guide.
  • Page 153 Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it.
  • Page 154 When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
  • Page 155 and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
  • Page 156 the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;...
  • Page 157 If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6.
  • Page 158 to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system.
  • Page 159 If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;...
  • Page 160 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A...
  • Page 161 That's all there is to it! BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California , Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License".
  • Page 162 This projector product includes the open source software program "libjpeg" which applies the terms and conditions provided by owner of the copyright to the "libjpeg". The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 163 (1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation. (2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG Group".
  • Page 164 This projector product includes the open source software program "libpng" which applies the terms and conditions provided by owner of the copyright to the "libpng". The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 165 libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000 , are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors: Tom Lane Glenn Randers-Pehrson Willem van Schaik...
  • Page 166 September 12, 2004 zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 167 If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. mDNSResponder This projector product includes the open source software program "mDNSResponder" which applies the following license terms "Apache License Version 2.0, January 2004". List of "mDNSResponder"...
  • Page 168 otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
  • Page 169 (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
  • Page 170 any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
  • Page 171 This projector product includes the open source software program "newlib" which applies the terms and conditions provided by owner of the copyright to the "newlib". The "newlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 172 The newlib subdirectory is a collection of software from several sources. Each file may have its own copyright/license that is embedded in the source file. Unless otherwise noted in the body of the source file(s), the following copyright notices will apply to the contents of the newlib subdirectory: (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc.
  • Page 173 The author of this software is David M. Gay. Copyright (c) 1991 by AT&T. Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software.
  • Page 174 So that all may benefit from your experience, please report any problems or suggestions about this software to the 29K Technical Support Center at 800-29-29-AMD (800-292-9263) in the USA , or 0800- 89-1131 in the UK, or 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. Advanced Micro Devices, Inc.
  • Page 175 Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes. THIS SOFTWARE IS PROVIDED "AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 176 So that all may benefit from your experience, please report any problems or suggestions about this software to the SuperH Support Center via e-mail at softwaresupport@superh.com. SuperH, Inc. 405 River Oaks Parkway San Jose CA 95134 (13) Royal Institute of Technology Copyright (c) 1999 Kungliga Tekniska H ﾃｶ...
  • Page 177 All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 178 (16) FreeBSD Copyright (c) 1997-2002 FreeBSD Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 179 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE...
  • Page 180 Copyright (C) 1991 DJ Delorie All rights reserved. Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  • Page 181 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 182 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE...
  • Page 183 Copyright (c) 1998, M. Warner Losh <imp@freebsd.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 184 OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (33) - Daniel Eischen (targets using libc/posix) Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 185 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED...
  • Page 186 * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above * copyright * notice, this list of conditions and the following disclaimer...

  • Page 187: Copyright Notice

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

This manual is also suitable for:

Powerlite 1880Powerlite 1870

Table of Contents