Using The Projector On A Network; Wired Network Projection; Connecting To A Wired Network - Epson PowerLite 1870 User Manual

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network (PowerLite 1880).

Wired Network Projection

Using Quick Wireless Connection (Windows Only)
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Crestron RoomView Support
Wired Network Projection
You can send images to your projector through a wired network (PowerLite 1880). To do this, you
connect the projector to your network, and then set up your projector and computer for network
projection.
After connecting and setting up the projector as described here, install the network software from the
Epson Projector Software CD-ROM on your computer. Use the following software and documentation to
set up, control, and monitor network projection:
• EasyMP Network Projection software sets up your computer for network projection. See the
EasyMP Network Projection Operation Guide for instructions.
• EasyMP Monitor software (Windows only) lets you monitor and control your projector through the
network. You can download the latest software and documentation from the Epson web site. Go to
www.epson.com/support
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly using the EasyMP Network Projection software.

Connecting to a Wired Network

Selecting Wired Network Settings
Parent topic:
Connecting to a Wired Network
To connect the projector (PowerLite 1880) to a wired local area network (LAN), use a 100Base-TX or
10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1. Connect one end of the network cable to your network hub, switch, or router.
(U.S.) or www.epson.ca/support
Using the Projector on a Network
(Canada) and select your projector.
40