Webcam Assembly - HP Spectrext Maintenance And Service Manual

16. Disconnect the cable from the webcam (3).
Reverse this procedure to install the display panel.

Webcam assembly

Description
Webcam assembly
Before removing the webcam assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Remove the webcam assembly:
58 Chapter 4 Removal and replacement procedures
Spare part numbers
689965-001
Display panel on page
Base enclosure on page
Battery on page 31).
54).
29).