Specifications - Vertex Standard VX-410 series Service Manual

Specifications

GENERAL Specifications
Frequency Range:
Number of Channels:
Number of Groups:
Channel Spacing:
PLL Steps
Operating Voltage:
Battery Life ( w/ save):
(Rx 5 : Tx 5 : STBY 90 Duty)
Temperature Range:
Frequency Stability:
Dimensions (WHD):
Weight (approx.):
RECEIVER Specifications (Measurements made per TIA/EIA-603)
Sensitivity (12 dB SINAD) :
Adjacent Channel Selectivity (W/N) : 70 / 65 dB
Intermodulation (W/N):
Spurious and Image Rejection:
Hum and Noise (W/N) :
Audio output:
TRANSMITTER Specifications (Measurements made per TIA/EIA-603)
Power output:
Modulation (W/N):
Spurious Emissions:
FM Hum and Noise Analog (W/N):
Audio Distortion:
Measurements per EIA standards unless noted above. Specifications subject to change without notice or obligation.
8
146 - 174 MHz
32 (16+16) channels
2 groups
12.5 / 20 / 25 kHz
2.5 / 6.25 kHz
7.5 VDC ± 20%
12.5h (16h) w/ FNB-V67LI
7h (8.8h) w/ FNB-V57
–22°F to +140°F (–30°C to +60°C)
±2.5 ppm
2.3" x 4.3" x 1.2" (58 x 18.5 x 30 mm)
10.6 oz (300g) w/Ant. Battery (FNB-V67LI) and Belt Clip
µ
0.25 V
70 dB
70 dB
45 / 40 dB
500 mW @4 Ohms, 5% THD
5 / 1 W
16K0F3E, 11K0F3E
70 dB
45 / 40 dB
Less than 3% @ 1 kHz
w/FNB-V67LI