Specifications - Vertex Standard VX-820 Series Service Manual

Specifications (VTX/EXP Version)
General
Frequency range:
Channel / Group:
Channel Spacing:
PLL Stepping:
Power Supply Voltage:
Current Consumption:
(Approx. @7.4 V)
Battery Life (Approx.):
Operating Temperature Range:
Frequency Stability:
Case Size (W x H x D):
Weight (Approx.):
Receiver (Measurement per TIA/EIA-603)
Circuit Type:
Sensitivity (12dB SINAD):
Adjacent Channel Selectivity:
Intermodulation:
Spurious Image Rejection:
Audio output:
Transmitter (Measurement per TIA/EIA-603)
RF Power Output:
Modulation Type:
Maximum Frequency Deviation: ±2.5/±4.0/±5.0 kHz
Audio Distortion:
Spurious Emissions:
Specifications subject to change without notice or obligation.
2
400-470 MHz (Version A)
450-512 MHz (Version D, VTX)
450-520 MHz (Version D, EXP)
32 CH / 1 Group (w/o LCD version)
512 CH / 16 Groups (w/ LCD version)
12.5/20/25 kHz
5/6.25 kHz
7.4 V
30 mA (Standby w/saver)
75 mA (Standby)
200 mA (Receive)
1.9 A (Transmit)
7 hours (w/ FNB-V86LI)
11.5 hours (w/ FNB-V87LI)
–22 °F to +140 °F (–30 °C to +60 °C)
±2.5ppm
2.3" x 3.8" x 1.5" (57.5 x 96.5 x 37.5 mm)
10.9 oz (310g) (w/FNB-V86LI, ATU-6, CLIP-920)
Double Conversion Super-heterodyne
0.25 μV/0.32 μV(W/N)
75/70 dB (W/N)
75/70 dB (W/N)
75 dB
700 mW @ 16 ohms 5% THD
5/2.5/1/0.25 W
Direct FM (16K0F3E/11K0F3E)
Less than 3% @ 1kHz
70 dB below carrier