Hose Attachments - Vax V027 User Manual

V027(Y) User Guide 5/10/06 11:47 am

Hose attachments

1
16
Turn
on
Put the cleaner in its upright
position. Turn the soap and power
switches to the OFF position.
4
17
Attach the water supply connector
into the hose water supply port at
the side of the machine. Press
firmly until it locks into place.
Page 8
Remove the hose from its stored
position on the back of the cleaner.
Lift the hose attachment cover
located on the top of the dirty water
tank.
Move the floor/tools selector to the
tools (upward) position.
2
Insert the end of the hose into the
tool opening and twist clockwise
until it locks into place.
5
Caution: DO NOT turn the soap
switch ON without solution in the
tank. DO NOT allow the solution
tank to run dry.
To wash upholstery, be sure that
the main power and soap switches
are both turned ON.
Note: Do not allow upholstery to
become too wet.
3
6
Turn
on