M-Audio AXIOM 25-49-61 User Manual page 13

2.4.2 Programming the Controls on Your Axiom
When programming a physical controller on your Axiom, the controller that was last used will be the first one selected for
programming. To select a different physical controller for programming, use one of the following two methods:
Method 1:
25-, 49- and 61-note versions:
Move the physical controller you wish to program, or press the assignable button or pad.
<
Method 2:
49- and 61-note versions:
Press Chan Assign and Ctrl Assign together to access the Ctrl Select setting.
<
The LCD display will flash the last used control.
<
Use the numeric keypad to enter the number of the physical controller you want to select for programming.
<
25-note version:
Press the Advanced button.
<
Press the Ctrl Select key on the keyboard.
<
The LCD display will show the last used control.
<
Use the numeric data entry keys to enter the number of the physical controller you want to select for
<
programming.
Press the Enter key to confirm and return to performance mode.
<
The advantage of method 2 is that you do not have to move a control to select it – so there is no danger of disturbing a
parameter on the MIDI device you are controlling.
Programming a control:
49- and 61-note versions:
Select the physical controller for programming using method 1 or 2 above.
<
Press the Ctrl Assign button.
<
The LCD display will show the currently assigned MIDI controller number The physical controller you are
<
programming is displayed in the bottom left hand corner of the LCD display for clarity.
Use the numeric keypad or the -/+ buttons to enter the MIDI controller number 0-131 as defined in Appendix C.
<
25-note version:
Select the physical controller for programming using method 1 or 2 above.
<
Press the Advanced button.
<
Press the Ctrl Assign key on the keyboard.
<
The LCD display will show the currently assigned MIDI controller number The physical controller you are
<
programming is displayed in the bottom left hand corner of the LCD display for clarity.
Use the numeric data entry keys or the -/+ buttons to enter the MIDI controller 0-131 as defined in Appendix C.
<
Press the Enter key to confirm and return to performance mode.
<
The settings for your controllers can be saved to any of the 20 memory locations on your Axiom. This process is
explained in detail in section 3.2.
Note: By default, the LCD display shows transmitted real time controller values between 0 and 127 as a physical control
like an encoder or fader is being moved. Alternatively, the LCD can be configured to only show the assigned controller
number of the currently used physical controller (e.g. controller number 7 for Volume). The LCD display mode can be
changed as follows:
Press the Zone Range and Zone/Group buttons together.
<
The LCD will display OFF.
<
Simultaneously press the Zone Range and Zone/Group buttons again to change the LCD back to its default mode.
<
The LCD will display ON.
14
Section 2: Basic MIDI Control From Your Axiom