To Review The Caller Id History; Make A Call Log Entry Ready To Dial - AT&T EL52109 User Manual

Caller ID
Caller ID history

To review the caller ID history

1. When a handset is in idle mode, press
the caller ID history in reverse chronological order,
starting with the most recent call.
-OR-
You can also review the caller ID history by pressing
/SELECT, then press
MENU
>CALL LOG, then press
2. Press CID or DIR
on the right.
3. Press OFF/
A double beep sounds when the list reaches the beginning
or end of the call log.

Make a call log entry ready to dial

Although the call log entries received typically have 10 digits (the area code
plus the seven-digit number), in some areas, you might need to dial only the
seven digits, or 1 plus the seven digits, or 1 plus the
area code plus the seven digits. You can change the
number of digits that you dial from and store in the
call log.
While reviewing the call log, press # repeatedly to
show different dialing options for local and long
distance numbers before dialing or saving the
telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in
front of the telephone number before dialing or
saving it in the directory.
When the number is shown in the correct format for dialing, press
PHONE/
FLASH
NOTE: If you do not need to dial the area code for local calls, make sure to program
your HOME AREA CODE. See page 13 for details.
CID or DIR
/SELECT twice to REVIEW.
MENU
to scroll through the list as shown
to exit the caller ID history.
CLEAR
or SPEAKER to call the number.
CID to review
to scroll to
32
IBOETFU
7!NJTTFE!DBMMT!
CID
Spcfsu!Cspxo
999.994.3556
Dibsmjf!Kpiotpo
911.333.4222
994.3556
2.994.3556
Press #
999.994.3556
2.999.994.3556
994.3556
2.994.3556
999.994.3556
2.999.994.3556
Press
1