Answering Call Using Headset
Press HEADSET key to answer (Code 05)
Converse
Press HEADSET key to hang up
Enabling Headset Automatic Answer for ACD Agents
While phone is idle:
Press Feature
Press HEADSET key (Code 05)
Note 1:
The Headset key flashes when Automatic Headset is activated.
Note 2:
To cancel Automatic Headset, repeat these steps.
Programming
Extension Name
To program your extension name:
Press Speaker
Dial 700
-OR-
Press the Extension Name Change key (Code 55)
Press Hold
Enter the name (up to 12 characters). Refer to the Character Entry Table.
Press Hold
Press Speaker
Station Speed Dial
To store a Station Speed Dialling number:
Press Speaker
Dial 755
Dial the Station Speed Dial buffer number (0~9)
(0 = Station Speed Dial buffer 10)
Dial trunk access code i.e. 0 (if necessary)
Dial telephone number to be stored (24 digits maximum)
Press Hold (if entering name) and dial name of party (13 letters maximum),
then press Hold again
Press Speaker
Note 1:
Valid entries are 0~9, # and
a hookflash.
Refer to Character Entry Table when entering name of party.
Note 2:
22
. Press MIC to insert a pause or Recall to insert