Macintosh-Specific Problems - Wacom Intuos 3 User Manual

Windows 98. The tablet
does not install properly.
Windows 98 or Me.
When working with
multiple monitors, the
screen cursor positioning
is incorrect after moving
into the unmapped area of
the virtual desktop.
Macintosh-specific problems
At startup, a dialog box
appears telling you that
either the driver failed to
load or the tablet
preferences have not yet
been created.
C
ONTENTS
Save your work and close all open applications before installing your tablet.
Plug the USB tablet cable into a powered USB port. The tablet will
automatically register as a USB device and the LED will light.
The A N H
DD EW ARDWARE
the default options. If prompted to install drivers for the USB Human
Interface Device, insert the Windows 98 CD, click OK, and enter the location
of the Windows CAB files (e.g.,
Note: The files may be located on your hard disk in the
:\ \ \
C WINDOWS OPTIONS CABS
After the A N H
DD EW ARDWARE
CD, insert the Wacom Tablet CD, and select C
On a multiple monitor system, the tablet is mapped to the virtual desktop (a
rectangular area covering all monitors). In the Wacom Tablet control panel's
P S dialog box, the screen rectangle represents the entire
ORTION OF CREEN
virtual desktop.
If your video display areas do not form a rectangle because they are
different sizes or they are not evenly aligned, the screen cursor positioning
will be incorrect after moving into the unmapped area of the virtual desktop.
To reestablish the correct screen cursor position, lift your Intuos3 tool away
from the tablet surface and then return it to within 6 mm (0.25 in) of the
tablet surface in an area of the tablet that is mapped to a display area.
The tablet was not detected at startup. Make sure the USB interface cable
is securely connected and that the status LED on the tablet is blue. If your
tablet is plugged into a powered USB hub, make sure the hub is connected
and active.
From the G menu, select A
O
Launch the A S
PPLE YSTEM
tab. A USB tablet should be displayed by the profiler. If a USB tablet was
not found, check the USB tablet cable connection or try plugging the tablet
into a different USB port.
If you are still having problems, open the OS X Disk Utility application and
run R D P
EPAIR ISK ERMISSIONS
contact Wacom for Technical Support. See
C
ONTENTS
I
NDEX
W will display. Follow the prompts, selecting
IZARD
:\ 98).
D WIN
folder.
W has finished, eject the Windows 98
IZARD
ONTINUE
and open the U
PPLICATIONS
P and select the D
ROFILER
from the F A
IRST ID
technical support
I
NDEX
T
ROUBLESHOOTING
65
.
folder.
TILITIES
V
EVICES AND OLUMES
tab. If this does not help,
options.
65