Physical Interface - TP-Link TL-PA2030 User Manual

Ethernet LED

2.3 Physical Interface

There are three physical interfaces on this Powerline Adapter.
Power Plug
Pair Button
Interface
Ethernet Port
Power Plug*
Pair Button
*
The provided power plug may differ from the picture due to different regional power specifications.
Here we take the EU version of this product as an example.
Note:
1. If the pair button is pressed till all the LEDs turn off (about 10 seconds), the Powerline Adapter will
leave the network which it is associated with and its network name assumes a random value. The
Power LED turns off when it disconnects from the Powerline network.
2. For detailed information about the Pair button, please refer to
Use the Pair Button.
At least one Ethernet port is connected, but there is no
On
data being transferred.
Blinking At least one Ethernet port is transferring data.
Off No Ethernet port is connected.
Three 10/100Mbps Ethernet ports for connecting the adapter to the PC or
the broadband device with a network cable.
A Power Plug for connecting the adapter to a power socket (100–240V~).
Pair button is used to secure a powerline network. To secure your network,
please follow the steps below. Firstly, plug in a new adapter, and press its
pair button for 1 second; then plug in another adapter and press its pair
button for 1 second as well. The two buttons should be pressed within 2
minutes of each other. After that, wait about 60 seconds so that the two
adapters can finish connecting.
TL-PA2030 AV200 3-port Mini Powerline Adapter
Description
Chapter 5 Advanced Feature: How to
5
Ethernet Port