Arming And Leaving With Others Staying - NAPCO FREEDOM Manual

A R M I N G AN D L E AV I N G W I T H O T H E R S S T A Y I N G
If you are arming and leaving with other family members remaining home:
1 Check the F-TP Touchpad indicators. The green
READY
2 Press the STAY button.
STAY
STAY will begin to flash, indicating the 60 second exit delay period.
STAY
3 Open the door and exit.
4 Lock the deadbolt from the outside to arm the system.
that the system is ready to arm.
•
If the green READY light is BLINKING, this indicates that a zone is faulted. The READY light is blinking out the zone
number of the open zone. Count the flashes and look at your zone list to see which zone is open and secure it (close
the door or window, etc.). If you cannot immediately secure the zone, it may be bypassed (see page 7).
•
If the green READY light is OFF, another monitored deadbolt is not locked. All other monitored deadbolts must be
locked before the system can be armed. Go to the other deadbolt location and lock it.
If the deadbolt has not been locked within 60 seconds of pressing
revert back to a disarmed state.
light should be ON-STEADY, indicating
READY
STAY
, the system will
9