Communications - Dell OPTIPLEX 9010 ALL-IN-ONE Technical Manualbook

DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
C OMMUNIC ATI ONS - NET WORK ADAPTER (NIC)
INTEGRATED INTEL® 82579 GIGABIT1
External Connector Type
Data Rates supported
Controller Details
Controller bus architecture
Integrated memory
Data transfer mode (example Bus-Master DMA)
Power consumption (full operation per data rate connection
speed)
Power consumption (standby operation)
IEEE standards compliance (example 802.1P)
Hardware Certifications (example FCC, B, GS mark...)
Boot ROM Support
Network Transfer Mode (example Full Duplex, Half Duplex)
Network Transfer Rate (example 10BASE-T (half-duplex) 10
Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
Operating temperature
Operating humidity
Operating System Driver Support
Manageability (examples WOL, PXE)
Management Capabilities Alerting
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and
network infrastructure is required.
10/100/1000 Mbps
PCIe-based interface for S0 state, SMBus for Sx low power state
711mW (Max.)
227mW (Max.)
EEPROM (located in SPI)
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
0° C to 85° C (32° F to 185° F)
20% to 80% (non-condensing)
Windows 7 32/64, Windows XP 32/64, Vista 32/64
Intel® Standard Manageability, Intel Core 2 Duo/Quad Proces-
sor with vPro Technology
AIO
RJ45
1
N/A
N/A
802.3
N/A
WOL, PXE 2.1
17